http://www.vlink-pcdcutters.com/diamond-bearing/ Diamond Bearing manufacturer Viewlink has been focusing on better application of diamond bearings (PDC bearings) in rotary steering, turbodrills, downhole tools, oilfield pumps and other equipment, and continue to explore the limits of their use in harsh environments, aiming to use unique The technology promotes Viewlink Diamond to become a good supplier and service provider in the field of global PDC tools. The diamond thrust bearing is assembled in a series, and the PDC is welded to a steel bearing ring by brazing. A PDC thrust bearing group includes a rotating bearing ring and a stationary bearing ring. The two rings are opposed to each other, and the PDC surface on the inner diameter of one of the rings is in direct contact with the PDC surface on the outer diameter of the mating ring. During operation, the PDC surfaces on the two rings rub against each other, but this friction is very low. Viewlink PDC thrust bearings are very suitable for process fluid lubrication applications, especially applications where there are abrasive particles in the fluid. Due to the very low wear rate, the service life of PDC bearings varies from 1,000 hours to many years, depending on the application. Features of Viewlink PDC thrust bearings Diamond bearings are very resistant to wear. Compared with traditional tungsten carbide or other cemented carbide bearings, the life of diamond bearings is 4 to 10 times longer. And they can operate at high temperatures (the current upper limit temperature is 233掳C). The PDCbearing system can absorb excessive load for a long time, and the low friction loss in the bearing assembly further increases the transmitted mechanical power. Specifications of Viewlink PDC thrust bearings The size of the bearing varies from 1 inch to 10 inches Our PCD bearings and wear parts can be customized according to customer drawings or samples. Viewlink PDC thrust bearings are very resistant to wear and have a life span of 4 to 10 times longer than traditional tungsten carbide or other hard alloy bearings. The PDC thrust bearing adopts the diamond composite sheet welding process. The diamond composite sheet in the PDC bearing is made of selected diamond powder and tungsten carbide composite sintered under high temperature and high pressure. It is independently developed and manufactured by Viewlink Technology, which condenses the company's R&D team for nearly ten years. Experience and hard work. The formed radial or thrust bearings can be used in rotary guides, mud motors, and turbodrills, with extended life and improved reliability. Please let us know your demand on PDC thrust bearings.Diamond Bearing manufacturer website:http://www.vlink-pcdcutters.com/diamond-bearing/